NEWS
- +86-18721304861
- +86-512-63869009
- 28 Xiaoping Avenue,Badu,Zhenze Twown,Wujiang,Suzhou City,Jiang su Province, China
How to Determine the Size of Elevator Steel Structure Well
The dimensions of the elevator shaft shall be pre-determined prior to installation. Moreover, the size of each elevator hoistway steel structure are not the same, need to be based on the actual situation on-site inspection may be. In general, the elevator shaft steel structure size can be divided into two cases, one is the overall structure, the other is the local structure.Elevator steel structure of the overall structure of the shaft are steel, then, according to the main beam spacing, the specific location of the elevator shaft, elevator shaft size requirements, the basis of the size of concrete to determine the beam. The main body size is based on the requirements of the elevator shaft size, according to the basic beam, the main beam made of appropriate amplification.
If it is a separate elevator shaft steel structure, it is directly in accordance with the elevator shaft size selection H steel or square tube in accordance with the shaft size can be directly designed, but pay attention to whether the bottom pit foundation structure, if appropriate, can be enlarged .
Of course, and the elevator manufacturers with the very important, a lot of basic data, well depth, pit depth, hoisting height, door size, door frame size, as well as guide rail ring beam size, etc., manufacturers need to provide , And different manufacturers of different models of different specifications, details are not the same, so the details with the very important.
Then, to determine the size of the main frame, the best next step to determine the specific manufacturers, manufacturers involved in the design, providing parameters and comments, weighing reserve, and so on, the details of the specific manufacturers need to be set, the latter is very important.